INSTEK GPS-3030D CALIBRATION and INSTEK GPS-3030D REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the INSTEK GPS-3030D Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   INSTEK GPS-3030D   Description / Specification:    
INSTEK GPS-3030D 30V 3A Single Output DC Power Supply

The GW Instek GPS-3030D is a single output, 90W, linear DC power supply. It features overload and reverse polarity protection as well as high regulation and low ripple / noise that are maintained at 0.01% and < 1mVrms, respectively. Continuous or dynamic internal load selection accommodates applications such as pulsed current. Remote control terminals offer programming and operation from an external device. Specifications. DC Output: 0 to 30 V / 0 to 3 A. Constant Voltage (CV) Operation Line Regulation: <= 0.01% + 3 mV. CV Operation Load Regulation: <= 0.01% + 3 mV (rating current < 3 A). CV Ripple & Noise: <= 0.5 mVrms 5 Hz to 1 MHz. CV Recovery Time: < 100 µS ( 50% load change, minimum load 0.5A ). CV Output range: 0 to rating voltage continuously adjustable. Constant Current (CC) Operation Line Regulation: <= 0.2% + 3 mA. CC Operation Load Regulation: <= 0.2% + 3 mA. CC Ripple Current: <=3 mArms. CC Output Range: 0 to rating current continuously adjustable (Hi/Lo range switchable). Meter 3 1/2 digits 0.5" LED display. Meter Accuracy: ±( 0.5% of rdg + 2 digits ).



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the INSTEK GPS-3030D. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your INSTEK GPS-3030D CALIBRATION and/or INSTEK GPS-3030D 30V 3A Single Output DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: